<Revise histrory> 
 1. Modify DMI Table Type 4 Offset 19h (SOCKET478), Type 17 Offset 12h (DDR2).
 2. Intel MBI: the return values of MBI 0709h are wrong and the return values of MBI 0509h are BIA-enabled.
 3. Modify support W port replicator.

Please follow the below steps to update BIOS:

1. DOS mode 
      Step 1: In Windows mode , please make a new folder "c:\bios" and download C2-108.zip file to this folder.
      Step 2: Extract C2-108.zip under this folder.   
      Step 3: Get/create a bootable disk.
      Step 4: Insert the bootable disk into floppy drive (or external USB floppy drive) connected to the unit and reboot the system. 
      Step 5: Press <F2> to enter BIOS setup, choose [Boot] on the top menu, follow the instructions to select "Floppy Drive" as first boot device, then save setting and reboot.  Please make sure to enable [Legacy USB Support] in Advanced page if you use external USB floppy drive.
      Step 6: Go to directory "c:\bios" and execute the batch file C2-108.bat to update BIOS in DOS mode
      Step 7: After the flash , please load load setup defaults in BIOS setting .

2. Windows Mode
   Step 1: Please download C2-108.zip file to Windows desktop.
   Step 2: Run C2-108.zip icon and use mouse right key to select "Extract All..." to decompress this file.   You will get  C2-108.exe. 
   Step 3: Execute C2-108.exe and follow the instructions to update BIOS.
   Step 4: After the flash , please load load setup defaults in BIOS setting .
